POWER SUPPLY
8 – 32 VDC

INTERNAL BATTERY RECHARGE VOLTAGE
10 – 32 VDC, built-in 7.4 V, 1Ah lithium battery

BATTERY AUTONOMY
up to 5 hours

MAXIMUM CURRENT DRAW
1,2 A at 12 V

ENVIRONMENTAL
Operating temperature: 0 ÷ +45°C
Storage temperature: – 20 °C ÷ 60 °C
Operating relative humidity: 10 % ÷ 80 % without condensation

DIMENSIONS
155x178x55 mm (excluding Bluetooth antenna)

WEIGHT
1,2 kg

OSCILLOSCOPE:

CHANNELS
4 independent input channels with analogue bandwidth of 10 MHz (-3 dB); sampling rate 20MSamples/sec at 10 bit with 1 or 2 channels active, 10 MSamples/sec at 10 bit with 3 or 4 channels active

MAX INPUT VOLTAGE
+/- 50 Vmax, AC or DC couplingbr

VERTICAL SCALE FOR EACH CHANNEL
from 20 mV/Div to 50 V/Div

HORIZONTAL SCALE
from 500 ns/Div to 5s/Div

TRIGGER
source CH1, CH2, CH3, CH4, selectable, trigger delay

DISPLAY MODE
Normal, Auto, Single shot

MEASUREMENT OF FOLLOWING VALUES
frequency, period, RMS, Vmax, Vmin

MULTIMETER:

GALVANIC INSULATION
up to 1 kV for safe measurements

VOLTAGE MEASUREMENTS
Maximum measurable voltage: ± 400VDC, input impedance 4.7 MΩ, 3 digit resolution; three value ranges, with automatic or manual scale selection: 0-6 V, 6-60 V, 60-400 V AC/DC

RESISTANCE MEASUREMENTS
Three value ranges, with automatic or manual scale selection: 0-1000 Ω, 1-100 kΩ, 100 – 10 MΩ, resolution: 3 digits

CURRENT MEASUREMENTS
Current measurements performed by connecting TEXA “BICOR” series probes to the jacks on the front of the tool

TNET FUNCTION
Troubleshooting on CAN ISO11898, ISO11519 networks

BPP FUNCTION
Troubleshooting on starting systems Voltage measurements: DC up to 50VDC

ELECTROMAGNETIC COMPATIBILITY
ETSI EN 301 489-17 V 1.2.1 EN 6/326/1